POOLEYE IN GROUND POOL ALARM
 
Don't jeopardize your children's safety when it comes to swimming pools.
Be alerted to accidental falls — before it's too late — with
a pool alarm that activates a loud siren the moment a child falls into
the pool.
This underwater wave sensor mounts to the edge of your pool and detects
disturbances caused by kids or animals as light as 15 pounds, while remaining
immune to disturbances caused by wind and rain. Sensitivity is adjustable
so you can minimize false alarms or maximize protection.
When it detects a fall, it alerts you with a blaring 120dB siren at the
pool's edge and a 100dB siren at an indoor receiver placed within 100
feet of the poolside unit. Because the poolside unit is battery operated
— there's absolutely no shock hazard. It even continues to provide
protection during power outages! If the battery runs low, an alarm chirps
every 60 seconds, reminding you to replace the battery.
The indoor receiver's 3-junction terminal block can also be connected
to your existing home security or automation system — perfect for
monitoring the pool from neighboring kids or pets while you're away from
home. All units meet the stringent ANSI/UL 464 and CSA C22.2 requirement.
Mounting hardware included.
The Above-Ground Pool Alarm (#32210) monitors round pools up to 24' in
diameter, or oval pools up to 16' x 32'. The poolside unit uses one 9V
battery. The indoor receiver plugs into an AC outlet, and uses a 9V battery
in the event of a power outage. (Batteries sold separately).
The In-Ground Pool Alarm (#32211) monitors pools up to 18' x 36'. The
poolside unit uses one 9V battery and one AA battery. The indoor receiver
plugs into an AC outlet, and uses a 9V battery in the event of a power
outage. (Batteries sold separately). Other features of this model include
two built-in thermometers that measure both pool and ambient air temperature
(in °F or °C) on a ¾" LCD display. Comes with brackets
for mounting to your pool ladder (1.5" and 1.9" diameter) or
deck.
For the ultimate in protection, check out the In-Ground Pool Alarm with
Night Vision (#32212). It monitors pools up to 18' x 36' and comes with
a PIR motion sensor that monitors the surface of your pool while the underwater
wave sensor monitors below. The motion sensor features a detection angle
of 180° at a range of 50' (adjustable sensitivity). A human voice
signals you when the PIR motion sensor or the underwater wave sensor has
been triggered. The poolside unit uses six AA batteries. The indoor receiver
plugs into an AC outlet and uses a 9V battery in the event of a power
outage (all batteries sold separately). Comes with brackets for mounting
to your pool ladder (1.5" and 1.9" diameter) or deck.
Important note: Pool Eye Alarms are not a substitute for diligent supervision
or for pool access barriers.
Can be easily connected to your home security system
Easy to use, quick to install pool alarm
1 year warranty
|